pm-002-003

PM-002/MT2 Pen Mandrel Kit

The lathe mandrel kit is designed for producing pens. It includes a 7mm drill bit, mandrel, and live mandrel saver. The live mandrel saver allows you to attached the pen mandrel to your tailstock without over-tightening or under-tightening. It slides through the center bore in the live center nose, so mounting adjustments are fast and super secure.


PM-002

pm-002-01

pm-002-02

PM-002-03

PM-002-03

Easy Installation

The pen mandrel slides through the center bore in the live center nose, so mounting adjustments are fast and super secure.

Quick Tighten

The live mandrel saver allows you to attached your pen mandrel to your tailstock without over-tightening or under-tightening.

Sturdy and Durabllity

The shaft is made by hardened stainless steel for durability and smooth operation.

7mm Drill Bit

Supplied with drill bit for drilling 7mm holes.


TRIM-001-01

TRIM-001 7pc Universal Barrel Trimming System

A clever tool used on any of the projects tubes to both clean out any excess glue and to square up the ends of the barrel.


trim-001-03

trim-002-03

trim-002

trim-002-03

Various occasions

The pilot shafts are suitable for mounting into a drill chuck, lathe chuck, drill press or hand drill...

Easy to clean

The cutting shafts can easily clean and remove the extra glue, bits of wood, impurities, etc. from the tubes and make the tube cut flatte

Suitable size

The pilot shafts contain the diameter of 6.2mm, 7.2mm, 8.6mm,9mm.


INT-001

INT-001 Pen Tube Insertion Tool

It could Insert your glued pen tubes into your pen blanks the easy way with this tapered, chrome plated, glue resistant tool.

 

  • A clever little tool used on any of the projects tubes to both clean out any excess glue and to square up the ends of the barrel. An essential accessory for anyone who is seriously into the pen making business.
  • This pen barrel trimmer set includes 4 pcs cutter shafts, 1 cutting head, 1 sleeve adapter and 1 hex key wrench.
  • The pilot shafts contain the diameter of 6.2mm, 7.2mm, 8.6mm,9mm. The cutting head is made by high-hardness M2 HSS material, measuring about 19 mm in external diameter and 6mm in inner diameter.
  • The shafts are suitable for mounting into a drill chuck, lathe chuck, drill press or hand drill.
  • The cutting shafts can easily clean and remove the extra glue, bits of wood, impurities from the tubes and make the tube cut flatter.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Related Products

Recently Viewed Products