IN STOCK
Filter
135 results
20
- 10
- 15
- 20
- 25
- 30
- 50
Prix: élevé à faible
- En vedette
- Meilleures ventes
- Alphabétique, de A à Z
- Alphabétique, de Z à A
- Prix: faible à élevé
- Prix: élevé à faible
- Date, de la plus ancienne à la plus récente
- Date, de la plus récente à la plus ancienne
Sort
Sort by:
- En vedette
- Meilleures ventes
- Alphabétique, de A à Z
- Alphabétique, de Z à A
- Prix: faible à élevé
- Prix: élevé à faible
- Date, de la plus ancienne à la plus récente
- Date, de la plus récente à la plus ancienne
-
NCK-3.75ZN/S1 Wood Lathe Chuck 3-3/4" Self Centering Chuck Set 1”x 8TPI Direct Thread with locking set screws for reverse turning
Feature 1: Special Designed Bottom Jaw Jaws for the CK-3.75ZNS1 are compatible with the following chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4 Feature 2:Two sets locking holes for reversing running The design of the locking hole takes into...- $165.95 USD
$185.95 USD- $165.95 USD
- Unit price
- / per
2 reviews -
6PCS M2 Cryogenically Treated Steel Chisel Set
M2 CRYO HSS STEEL: Cryogenic treatment of M2 HSS means this steel has been subjected to a complex immersion procedure at temperatures as low as minus 195C.Excellent sharpness and toughness, suitable for hardwood turning 320MM BEECH HANDLE: A suitable length for the beginner, amateur or professional...- $149.99 USD
$249.99 USD- $149.99 USD
- Unit price
- / per
No reviews -
MC-FS6 Woodturning Steady Rest for Bowl Woodturning Lathe.
This bowl steady rest with double plastic wheel auxiliary support could be used to support disc-shaped, bowl-shaped woodturning, prevent wood biased. It has obvious support effect on thin turning. The opening is adjustable, suitable for turning workpieces of different diameters. Compatiable with most brands'...- $97.99 USD
$97.99 USD- $97.99 USD
- Unit price
- / per
No reviews -
CK100 3.75" 4-Jaw Key Chuck Thread 1"x8TPI with Dovetail Jaws, Wood Screw, Two Nylon Washers, Square Key, Hex Key for Woodlathe Woodturning.
The chuck could fit range of CK jaws and the Jaws are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. 1” x 8 TPI...- $97.99 USD
$97.99 USD- $97.99 USD
- Unit price
- / per
No reviews -
NCK-3.75ZN Woodturning 3-3/4" Self Centering Chuck with 1”x 8 TPI direct thread, locking set screws for reverse turning
Brand BMWOOD Compatible Devices Lathe Thread Size 1”x 8 TPI direct thread Included Components 3-3/4" Self Centering Chuck, Dovetail Jaw and Woodworm Screw Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Scroll chuck...- $85.55 USD
$85.55 USD- $85.55 USD
- Unit price
- / per
No reviews -
YD6540 Quick-Change Jaws for Woodturning Lathe for Making Pipe and Spoons.
It can meet the needs of making pipes and can also be used to make spoons. The scale can better determine the wood clamping position and the clamping range is greatly increased. The quick change design makes it very convenient to change. The NCK...- $79.99 USD
$79.99 USD- $79.99 USD
- Unit price
- / per
No reviews -
Cryo M2 HSS Bowl Gouge 1/2" Bowl Gouge (5/8" dia.) with 15-1/2" Beech Handle for Woodturning Chisels
Brand BMWOOD Size 5/8" Bowl Gouge Handle Material Beech Wood Blade Edge Straight Blade Material Stainless Steel, Alloy Steel Made from genuine M2 high-speed steel that’s cryogenically treated to increase wear resistance and edge-holding ability that rivals more expensive brands of woodturning tools. Fitted...- $70.49 USD
$93.99 USD- $70.49 USD
- Unit price
- / per
No reviews -
NCK-G3.75 3.75" 4 Jaw Key Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen Key
Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.(All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used) The tightening mechanism provides additional grip strength to the workpiece. The dovetail jaw...- $69.99 USD
$69.99 USD- $69.99 USD
- Unit price
- / per
No reviews -
5/8" Dia Post 4pcs Set Straight Horizontal Support Tool Rest for Woodturning Lathe.
Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results. This set includes four different lengths straight tool rests: 3-1/2", 6", 9",12". Different lengths for the different jobs. Tool rest is suitable for...- $65.99 USD
$65.99 USD- $65.99 USD
- Unit price
- / per
No reviews -
Cryo M2 HSS 5/8" Spindle Gouge with Beech Handle Length 15-1/2", Woodlathe Chisels for Woodturning
Brand BMWOOD Size 5/8" Spindle Gouge Handle Material Beech Wood Blade Edge Straight Blade Material Stainless Steel, Alloy Steel Made from genuine M2 high-speed steel that’s cryogenically treated to increase wear resistance and edge-holding ability that rivals more expensive brands of woodturning tools. Spindle...- $65.99 USD
$87.99 USD- $65.99 USD
- Unit price
- / per
No reviews -
Woodturning Lathe Spindle Steady Rest MC-FS4, Wood Turning Three Wheels Stabilizer Clamping Tool.
Woodturning steady rest can be used to rotate long spindles such as baseball bats, table and chair legs, and other long spindles. Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2". 3-point ball bearing spindle support. The wheels are...- $64.99 USD
$75.99 USD- $64.99 USD
- Unit price
- / per
No reviews -
PM-002/MT2 Pen Mandrel Saver +TRIM-001 7pc Universal Barrel Trimming System+ INT-001 Universal Pen Tube Insertion Tool
PM-002/MT2 Pen Mandrel Kit The lathe mandrel kit is designed for producing pens. It includes a 7mm drill bit, mandrel, and live mandrel saver. The live mandrel saver allows you to attached the pen mandrel to your tailstock without over-tightening or under-tightening. It slides...- $59.85 USD
$59.85 USD- $59.85 USD
- Unit price
- / per
No reviews -
4PCS Carbide Tipped Chisel Set with 10X10mm Chisel Bar and 320mm Beech Handle
Excellent sharpness and toughness M2 cryogenically treated high speed steel blade with hardness 65HRC. Excellent sharpness and toughness, suitable for hardwood turning Woodturning carbide tipped chisel Wood turning tools can be rotated or replaced to provide a fresh cutting edge whenever needed. Beech...- $58.79 USD
$78.79 USD- $58.79 USD
- Unit price
- / per
No reviews -
Straight Tool Rest Set 4" 6" 9" 12" Tool Rest, 5/8" and 1" Stem for Spindle Woodturning Woodlathe Tools.
The Straight Tool Rest Set includes 4" 6" 9" 12" Tool Rest and 3" Length Stem with 5/8" Dia , 5" Length Stem with 1" Dia . Interchangeable stems fit most wood lathes in the market. Locating sleeve ensures the junction tightened. Ease of...- $58.00 USD
$58.00 USD- $58.00 USD
- Unit price
- / per
No reviews -
Carbide Tipped Straight Hollowing Tool For Woodturning.
The ultra-sharp blades with an extra-long edge life are rotated until all edges are dull. Once all edges are used up, the TCT cutter could be replaced This tool allows any skill level to achieve professional results for hollowing work with minimum effort...- $54.99 USD
$54.99 USD- $54.99 USD
- Unit price
- / per
No reviews -
Mid-Size Carbide Tipped Curved Hollowing Tool for Woodturning.
The ultra-sharp blades with an extra-long edge life are rotated until all edges are dull. Once all edges are used up, the TCT cutter could be replaced This tool allows any skill level to achieve professional results for hollowing work with minimum effort...- $54.99 USD
$54.99 USD- $54.99 USD
- Unit price
- / per
No reviews -
Carbide Tipped Large Curved Hollowing Tool For Woodturning.
The ultra-sharp blades with an extra-long edge life are rotated until all edges are dull. Once all edges are used up, the TCT cutter could be replaced This tool allows any skill level to achieve professional results for hollowing work with minimum effort...- $54.99 USD
$54.99 USD- $54.99 USD
- Unit price
- / per
No reviews -
NCK-3.75Z-FJ10 10" Flat Jaws with 8pcs Taper Plug Screws for Woodlathe Chuck
Brand BMWOOD Material Alloy Steel Included Components 10" Flat Jaws The jaws are compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used) These button...- $54.69 USD
$54.69 USD- $54.69 USD
- Unit price
- / per
1 review -
M2 HSS Bowl Gouge 3/8" Bowl Gouge (1/2" Dia.) with 12-1/2" Beech Handle for Woodlathe Chisels
Brand BMWOOD Size 1/2" Bowl Gouge Handle Material Beech Wood Blade Edge Straight Blade Material Stainless Steel, Alloy Steel Made from genuine M2 high-speed steel that’s cryogenically treated to increase wear resistance and edge-holding ability that rivals more expensive brands of woodturning tools. Fitted...- $53.99 USD
$71.98 USD- $53.99 USD
- Unit price
- / per
No reviews -
S Shaped Stainless Steel Tool Rest Set with 1" and 5/8" Stems for Woodturning Lathe Bowl Turning.
S-Shaped crossbars are available in two styles: internal and external that use the internal style to hollow out bowls, use the external to shape the external form. This set include 9" Internal S-Shaped crossbar, 9" External S-Shaped crossbar, 3" length Stem with 5/8" Diameter,...- $53.00 USD
$58.00 USD- $53.00 USD
- Unit price
- / per
No reviews