Sidebar

CHUCKS & JAWS

CK-3.75Z-FJ10 10" Flat Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B chuck.
The 10" Flat Jaws for CK-3.75Z Series Woodturning Lathe Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. These button jaws are designed...

$54.69 USD

~~$54.69 USD~~
$54.69 USD

Unit price

per

No reviews
Safe Lock Woodworm Screw for Woodturning Lathe Chuck, Fits Sorby, Record Power, Nova, Harbor Freight Bauer 23222A-B, Vicmarc Chucks
Highly compatible: Suitable for various types chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4,Harbor Freight Bauer 23222A-B,Vicmarc VM100, Record RP4000. Quick and easy to use: With the Safe Lock Woodworm Screw, you can quickly and easily install small...

$18.99 USD

~~$18.99 USD~~
$18.99 USD

Unit price

per

No reviews
Out Of Stock

Bottle Stopper Chuck with 7mm Hole Drill Bit for use with 3/8" x 16tpi Bottle Stoppers with 1"x8TPI thread for lathe
Specifically designed to mount a bottle stopper blank to your lathe. 3/8" x 16tpi threaded stud matches most all bottle stoppers. 1” x 8 tpi thread for lathe headstock spindle. After the blank is drilled by the included drill bit, the blank can be...

$16.90 USD

~~$16.90 USD~~
$16.90 USD

Unit price

per

No reviews

Out Of Stock
Out Of Stock

Two pcs 1" and 3/4“ Diameter Multitooth Drive Centers with Spring-Loaded Point Fits Most 4 Jaw Chucks for Woodturning Lathe.
Designed to fit in most 4 jaw chucks eliminating the need to remove the chuck every time you need of use this center. 2 Pcs Lathe Chuck Spur Drive Set 3/4" & 1" Multi Point Crown Type with Spring Loaded Center to mount into...

$35.95 USD

~~$35.95 USD~~
$35.95 USD

Unit price

per

No reviews

Out Of Stock
ER25 10Pcs Set Imperial Sizes MT2 Chuck Holder with Inner Thread 3/8”X16TPI Included 3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" Collets for Woodturning Woodworking Lathe.
Collet chuck is precision machined to hold small work such as pen mandrels, bottle stoppers, and finials without marking or damaging the work. Collets with 1/32" range of movement, includes: 3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" Collets Collet chuck taper...

$99.98 USD

~~$99.98 USD~~
$99.98 USD

Unit price

per

No reviews
3 Pcs Set Draw Bar Collet Chuck 1/2", 3/8", 1/4", MT2 Taper, with Inner Thread 3/8 "x16TPI for Woodturning Wood Lathe.
Drawbar Collet Chuck are designed for use with Drawbar Collet Chuck system MT2. Inexpensive quality chucking system for turning small projects like spinning tops, birdhouse finials and similar items where accuracy and tool accessibility are a priority. Many professional pen turners prefer using a...

$49.95 USD

~~$49.95 USD~~
$49.95 USD

Unit price

per

No reviews
1/2-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...

$36.99 USD

~~$36.99 USD~~
$36.99 USD

Unit price

per

No reviews
5/8-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...

$39.99 USD

~~$39.99 USD~~
$39.99 USD

Unit price

per

No reviews
1/2-Inch Keyless Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor with 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 1/2 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...

$39.99 USD

~~$39.99 USD~~
$39.99 USD

Unit price

per

No reviews
5/8-Inch Keyless Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor with 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...

$42.99 USD

~~$42.99 USD~~
$42.99 USD

Unit price

per

No reviews
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 3/8"x16TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill chuck or other tools on the spindle of...

$26.99 USD

~~$26.99 USD~~
$26.99 USD

Unit price

per

No reviews
NCK-3.75Z-FP Face Plate Ring for Woodturning Lathe Chuck
Brand BMWOOD Material Alloy Steel Included Components FACE PLATE RING The jaws are compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Designed for use with dovetail jaws, this faceplate ring provides a secure attachment to bowl...

$16.99 USD

~~$16.99 USD~~
$16.99 USD

Unit price

per

No reviews
NCK-3.75Z-IP Indexing Plate for BMWOOD NCK Series Woodturning Lathe Chuck.
BMWOOD Indexing Plate for NCK chucks

$10.95 USD

~~$10.95 USD~~
$10.95 USD

Unit price

per

No reviews
CK Series Chuck Jaws Screw Set 16pcs

$9.95 USD

~~$9.95 USD~~
$9.95 USD

Unit price

per

No reviews
Out Of Stock

NCK Series WoodChuck M6x12mm Jaw Fixing Screws Set 16 pcs

$9.95 USD

~~$9.95 USD~~
$9.95 USD

Unit price

per

No reviews

Out Of Stock
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 1/4"x20TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 1/4"x20TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill bit on the spindle of the lathe can...

$26.99 USD

~~$26.99 USD~~
$26.99 USD

Unit price

per

No reviews
5.5" 4 Jaw Key Self-Centering Woodlathe Chuck, Thread 1-1/4"x8TPI", with Dovetail Jaws, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Chuck Key and T Handle Key for Woodturning Lathe.
Includes: 5.5" Chuck body,Dovetail Jaw, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Chuck Key and T Handle Allen Key. MAKE SURE check your wood lathe SPINDLE THREAD FIT first. Powerful and Positive Grip: The Self-Locking system delivers incredible gripping power after tightening,...

$215.99 USD

~~$215.99 USD~~
$215.99 USD

Unit price

per

No reviews
CK-5.5"-FJ10 10" Flat Jaws with 8pcs Taper Plug Screws for 5.5" Series Woodlathe Chuck, Woodturning Tools.
These 10" button jaws are designed for re-mounting bowls, to remove marks created by the chuck or to add decoration. Commonly used in compression mode, gripping with the long or short screw-in synthetic polymer buttons. Used to re-shape the bottoms of bowls that have...

$40.70 USD

~~$40.70 USD~~
$40.70 USD

Unit price

per

No reviews
CK-5.5"-FP Face Plate Ring for 5.5" Series Woodturning Lathe Chuck, Woodturning Tools.
Designed for use with dovetail jaws, this faceplate ring provides a secure attachment to bowl blanks, eliminating the need for separate faceplates. Securely attach bowl blanks, eliminating the need for separate faceplates. Excellent concentricity, minimising vibration for a chatter-free, super fine finish. Expand dovetail...

$13.81 USD

~~$13.81 USD~~
$13.81 USD

Unit price

per

No reviews
CK-5.5"-PJ Pin Jaws for 5.5" Series Woodturning Lathe Chuck, Woodworking Lathe Tools.
These pin jaws have both a compression and expansion grip, typically used for gripping inside the bases of small bowls, egg cups and goblets, or the outside of small tenons. Jaws will also grip small tenons in compression mode, without marking the surface. Class...

$31.49 USD

~~$31.49 USD~~
$31.49 USD

Unit price

per

No reviews