1.15

The Woodturning Calipers Tools is designed for accurately measuring wall thicknesses and diameters in hollow forms and bowls. Double-ended design for easy and accurate measurements, transferring readings from one end to the other without removing the calipers. Made of stainless steel for durability. Connected...

Precision Machined, Soild steel Accessory, aligns the head and the tailstock on lathes with adjustable headstocks quick and easy. Re-align the tail-stock on your lathe to eliminate that slight taper when turning over a long distance. Hardened Upto 52 +/-2 Hrc & Precision Ground...

The rod length is fully adjustable quickly with the micro-adjustment cylinder, accommodating most common pen sizes. Customize the assembly rod length quickly by the screw knob. The all-metal construction provides durability and rubber handles make it comfortable to use. Make pen assembly easy and...

Extension Bed with length 305mm (12 inch), Compatible with Harbor Freight Central Machinery BAUER 14 x 20 in. Wood Midi Lathe. Increasing total working length to 815mm (32 inch) is ideal for turning table legs, standard lamps etc. Fitted with two jackscrews for fine...

The Woodturning Calipers Tools is designed for accurately measuring wall thicknesses and diameters in hollow forms and bowls. Double-ended design for easy and accurate measurements, transferring readings from one end to the other without removing the calipers. Made of stainless steel for durability. Connected...

Made of No.45 hard steel for greatly extending the service life. 1”x 8 TPI thread is compatibile with the majority of wood lathes on the market. A flat-cut surface on the tail for easily install and disassemble (Wrench not included). Fitted with jackscrews for...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

Designed to fit in most 4 jaw chucks eliminating the need to remove the chuck every time you need of use this center. 2 Pcs Lathe Chuck Spur Drive Set 3/4" & 1" Multi Point Crown Type with Spring Loaded Center to mount into...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

Carbide tipped chisel is perfect for the serious wood turner who takes pride in their tools and the work they produce with them. Once one of the edges dulls just rotate the carbide inserts to a fresh, sharp edge and keep on turning. The...

The ultra-sharp blades with an extra-long edge life are rotated until all edges are dull. Once all edges are used up, the TCT cutter could be replaced   This tool allows any skill level to achieve professional results for hollowing work with minimum effort...

The ultra-sharp blades with an extra-long edge life are rotated until all edges are dull. Once all edges are used up, the TCT cutter could be replaced   This tool allows any skill level to achieve professional results for hollowing work with minimum effort...

The ultra-sharp blades with an extra-long edge life are rotated until all edges are dull. Once all edges are used up, the TCT cutter could be replaced   This tool allows any skill level to achieve professional results for hollowing work with minimum effort...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as comparable brands that accept 15mm (square) and 2.5mm thick inserts with...

8 Pcs Ideal chisel kit for turning pens,pepper,spindles bowls and lots more woodturning projects of all sizes. Each chisel measures 16-1/4" in length with a 6-1/4" High Speed Steel blade and a 10" hardwood turned handles. Set includes 8 pcs chisels: 3/16" Parting Tool,...

Specifically designed to mount a bottle stopper blank to your lathe. 3/8" x 16tpi threaded stud matches most all bottle stoppers. 1” x 8 tpi thread for lathe headstock spindle. After the blank is drilled by the included drill bit, the blank can be...