Integrated 8" Tool Rest with 1"(25.4mm) Post with Length 80mm for WoodTurning Lathes.

  • These tool rests are strong cast iron with a 45° slope allowing for a variety of tool grips whilst maintaining close control.
  • The top of the tool rest has a rounded profile allowing a tool to glide smoothly along the length.
  • This 8\ tool rest has 1\(25.4mm) diameter stem with length 80mm. Simply measure your present stem before ordering to get the correct fit.
  • These tool rests are an economical way of adding to your woodturning enjoyment.
  • Choose the suitable tool rest for different project. The tool rest gets in the way of the tailstock. when turning pens. light pulls or similar items. A longer project can entail constantly moving the lathe banjo to reposition the tool rest. which is not good for a smooth tool transition along the length of the piece.
Subtotal: $42.84

COUPON CODE:SAVE5
GET 5 OFF When Order Over 60

Free Shipping In U.S.

Shipping Policy

Refund Policy

Integrated 8" Tool Rest with 1"(25.4mm) Post with Length 80mm for WoodTurning Lathes.

Integrated 8" Tool Rest with 1"(25.4mm) Post with Length 80mm for WoodTurning Lathes.

$42.84

Integrated 8" Tool Rest with 1"(25.4mm) Post with Length 80mm for WoodTurning Lathes.

$42.84
行星刀架-01

行星刀架-02

These tool rests are an economical way of adding to your woodturning enjoyment.

Sometimes a project comes along, which means the tool rest supplied with the lathe is either too long or too short. The tool rest gets in the way of the tailstock, when turning pens, light pulls or similar items. A longer project can entail constantly moving the lathe banjo to reposition the tool rest, which is not good for a smooth tool transition along the length of the piece.

These tool rests are strong cast iron with a 45° slope allowing for a variety of tool grips whilst maintaining close control. The top of the tool rest has a rounded profile allowing a tool to glide smoothly along the length.


行星刀架-005

行星刀架-004

行星刀架-007

行星刀架-066

行星刀架-0088

TR-JG-4-1

TR-JG-6-1

TR-JG-8-1

TR-JG-12-1


行星刀架-2001

行星刀架-0010

行星刀架-209

行星刀架-2998

TR-JG-4-5/8

TR-JG-6-5/8

TR-JG-8-5/8


行星刀架-400
  • These tool rests are strong cast iron with a 45° slope allowing for a variety of tool grips whilst maintaining close control.
  • The top of the tool rest has a rounded profile allowing a tool to glide smoothly along the length.
  • This 8" tool rest has 1"(25.4mm) diameter stem with length 80mm. Simply measure your present stem before ordering to get the correct fit.
  • These tool rests are an economical way of adding to your woodturning enjoyment.
  • Choose the suitable tool rest for different project. The tool rest gets in the way of the tailstock, when turning pens, light pulls or similar items. A longer project can entail constantly moving the lathe banjo to reposition the tool rest, which is not good for a smooth tool transition along the length of the piece.

Related Products

Recently Viewed Products