-
CK-3.75Z-FJ10 10" Flachbacken für Drechselbankfutter der Serie CK-3.75Z, kompatibel mit dem Spannfutter 23222A-B von Harbor Freight Bauer.
Die 10-Zoll-Flachbacken für das Drechselfutter der Serie CK-3.75Z sind direkt mit dem Spannfutter Bauer 23222A-B von Harbor Freight kompatibel und auch mit Vicmarc VM100 und Record RP4000, für die Verwendung sind jedoch unsere CK-JS8-M5 M5 x 12 mm Backenbefestigungsschrauben erforderlich. Diese Knopfbacken sind für...- $54.69 USD
$54.69 USD- $54.69 USD
- Unit price
- per
-
Safe Lock Holzwurmschraube für Drechselfutter, passend für Sorby, Record Power, Nova, Harbor Freight Bauer 23222A-B, Vicmarc Chucks
Hohe Kompatibilität: Geeignet für verschiedene Spannfuttertypen: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4, Harbor Freight Bauer 23222A-B, Vicmarc VM100, Record RP4000. Schnell und einfach zu bedienen: Mit der Safe Lock Woodworm Screw können Sie kleine Schüsselrohlinge schnell und...- $18.99 USD
$18.99 USD- $18.99 USD
- Unit price
- per
-
Flaschenverschluss-Spannfutter mit 7-mm-Lochbohrer zur Verwendung mit 3/8" x 16TPI-Flaschenverschlüssen mit 1" x 8TPI-Gewinde für Drehmaschinen
Speziell für die Befestigung eines Flaschenverschlussrohlings an Ihrer Drehbank entwickelt. 3/8" x 16 tpi Gewindebolzen passt zu fast allen Flaschenverschlüssen. 1" x 8 tpi Gewinde für die Spindel der Drehbankspindel. Nachdem der Rohling mit dem mitgelieferten Bohrer durchbohrt wurde, kann er einfach auf das...- $16.90 USD
$16.90 USD- $16.90 USD
- Unit price
- per
-
Zwei Stück Mehrzahn-Antriebsspitzen mit 1" und 3/4" Durchmesser und gefederter Spitze, passend für die meisten 4-Backenfutter für Drechselbänke.
Passt in die meisten 4-Backen-Futter, sodass Sie das Futter nicht jedes Mal entfernen müssen, wenn Sie dieses Zentrum verwenden möchten. 2-teiliger Drehfutter-Stirnrad-Antriebssatz 3/4" und 1", Mehrpunkt-Kronentyp mit gefederter Mitte zur Montage in ein Holzdrehfutter. Die federbelastete Körnerspitze berührt zuerst das Werkstück und zieht sich...- $35.95 USD
$35.95 USD- $35.95 USD
- Unit price
- per
-
ER25 10Pcs Set Imperial Sizes MT2 Chuck Holder with Inner Thread 3/8”X16TPI Included 3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" Collets for Woodturning Woodworking Lathe.
Collet chuck is precision machined to hold small work such as pen mandrels, bottle stoppers, and finials without marking or damaging the work. Collets with 1/32" range of movement, includes: 3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" Collets Collet chuck taper...- $99.98 USD
$99.98 USD- $99.98 USD
- Unit price
- per
-
3 Pcs Set Draw Bar Collet Chuck 1/2", 3/8", 1/4", MT2 Taper, with Inner Thread 3/8 "x16TPI for Woodturning Wood Lathe.
Drawbar Collet Chuck are designed for use with Drawbar Collet Chuck system MT2. Inexpensive quality chucking system for turning small projects like spinning tops, birdhouse finials and similar items where accuracy and tool accessibility are a priority. Many professional pen turners prefer using a...- $49.95 USD
$49.95 USD- $49.95 USD
- Unit price
- per
-
1/2-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $36.99 USD
$36.99 USD- $36.99 USD
- Unit price
- per
-
5/8-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $39.99 USD
$39.99 USD- $39.99 USD
- Unit price
- per
-
1/2-Inch Keyless Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor with 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 1/2 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $39.99 USD
$39.99 USD- $39.99 USD
- Unit price
- per
-
5/8-Inch Keyless Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor with 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $42.99 USD
$42.99 USD- $42.99 USD
- Unit price
- per
-
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 3/8"x16TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill chuck or other tools on the spindle of...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
NCK-3.75Z-FP Planscheibenring für Drechselfutter
Marke BMW 3er Material Legierter Stahl Im Lieferumfang enthaltene Komponenten Frontplattenring Die Backen sind kompatibel mit den Spannfuttern: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Dieser Planplattenring ist für die Verwendung mit Schwalbenschwanzbacken konzipiert und ermöglicht eine sichere Befestigung...- $16.99 USD
$16.99 USD- $16.99 USD
- Unit price
- per
-
NCK-3.75Z-IP Indexierplatte für Drechselfutter der NCK-Serie von BMWOOD.
BMWOOD Indexierplatte für NCK Spannfutter- $10.95 USD
$10.95 USD- $10.95 USD
- Unit price
- per
-
-
NCK-Serie WoodChuck M6 x 12 mm Backenbefestigungsschrauben-Set, 16-tlg.
- $9.95 USD
$9.95 USD- $9.95 USD
- Unit price
- per
-
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 1/4"x20TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 1/4"x20TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill bit on the spindle of the lathe can...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
5.5" 4 Jaw Key Self-Centering Woodlathe Chuck, Thread 1-1/4"x8TPI", with Dovetail Jaws, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Chuck Key and T Handle Key for Woodturning Lathe.
Includes: 5.5" Chuck body,Dovetail Jaw, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Chuck Key and T Handle Allen Key. MAKE SURE check your wood lathe SPINDLE THREAD FIT first. Powerful and Positive Grip: The Self-Locking system delivers incredible gripping power after tightening,...- $215.99 USD
$215.99 USD- $215.99 USD
- Unit price
- per
-
CK-5.5"-FJ10 10" Flat Jaws with 8pcs Taper Plug Screws for 5.5" Series Woodlathe Chuck, Woodturning Tools.
These 10" button jaws are designed for re-mounting bowls, to remove marks created by the chuck or to add decoration. Commonly used in compression mode, gripping with the long or short screw-in synthetic polymer buttons. Used to re-shape the bottoms of bowls that have...- $40.70 USD
$40.70 USD- $40.70 USD
- Unit price
- per
-
CK-5.5"-FP Face Plate Ring for 5.5" Series Woodturning Lathe Chuck, Woodturning Tools.
Designed for use with dovetail jaws, this faceplate ring provides a secure attachment to bowl blanks, eliminating the need for separate faceplates. Securely attach bowl blanks, eliminating the need for separate faceplates. Excellent concentricity, minimising vibration for a chatter-free, super fine finish. Expand dovetail...- $13.81 USD
$13.81 USD- $13.81 USD
- Unit price
- per
-
CK-5.5"-PJ Pin Jaws for 5.5" Series Woodturning Lathe Chuck, Woodworking Lathe Tools.
These pin jaws have both a compression and expansion grip, typically used for gripping inside the bases of small bowls, egg cups and goblets, or the outside of small tenons. Jaws will also grip small tenons in compression mode, without marking the surface. Class...- $31.49 USD
$31.49 USD- $31.49 USD
- Unit price
- per
Aktuelle Trends
beliebte Produkte
NCK-3.75ZN Drechselfutter 3-3/4" Selbstzentrierendes Spannfutter mit 1" x 8 TPI Direktgewinde, Feststellschrauben für Rückwärtsdrehen
Marke BMW 3er Kompatible Geräte Drehbank Gewindegröße 1”x 8 TPI Direktgewinde Im Lieferumfang enthaltene Komponenten 3-3/4" selbstzentrierendes Bohrfutter, Schwalbenschwanzbacke und Holzwurmschraube Die Backen sind kompatibel mit den Spannfuttern: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Spiralspannfutter, ideal zum...
- $85.55 USD
$85.55 USD- $85.55 USD
- Unit price
- / per
No reviews
NCK-4M 4" 4-Backen-Mini-Selbstzentrierfutter, Gewinde 1"X8TPI, mit NCK-3.75Z-DJDD Schwalbenschwanzbacken, Holzschraube, zwei Nylon-Unterlegscheiben, T-Griff Inbus
- $52.99 USD
$52.99 USD- $52.99 USD
- Unit price
- / per
4 reviews
NCK-G3.75 3,75" 4-Backen-Schlüssel selbstzentrierendes Bohrfutter, Gewinde 1"X8TPI, mit NCK-3.75Z-DJDD Schwalbenschwanzbacken, Holzschraube, zwei Nylonscheiben, Inbusschlüssel mit T-Griff
Die Backen sind mit den Spannfuttern kompatibel: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (Für alle aufgeführten Spannfutter sind unsere NCK-JS8-M6 M6x12mm Backenbefestigungsschrauben erforderlich.) Der Spannmechanismus sorgt für zusätzliche Grifffestigkeit am Werkstück. Die Schwalbenschwanzbacke lässt sich mit einer...
- $69.99 USD
$69.99 USD- $69.99 USD
- Unit price
- / per
No reviews
NCK-4M/S1 4" 4 Jaw Mini Self-Centering Chuck, Thread 1"x8TPI, with Dovetail Jaws, Step Jaws, Pin Jaws, Wide Jaws, T Handle Allen Key, 2pcs Level Wrench, Wood screw and Two Nylon Washers.
BMWOOD NCK-4M/S1 4" 4 Jaw Mini Self-Centering Chuck, Thread 1"x8TPI, with Dovetail Jaws, Step Jaws, Pin Jaws, Wide Jaws, T Handle Allen Key, 2pcs Level Wrench, Wood screw and Two Nylon Washers.
- $99.99 USD
$99.99 USD- $99.99 USD
- Unit price
- / per
No reviews
NCK-3.75ZN/S1 Drehbankfutter für Holz, 3-3/4 Zoll, selbstzentrierendes Spannfutterset, 1 Zoll x 8 Zähne pro Zoll, Direktgewinde mit Feststellschrauben für Rückwärtsdrehen
Merkmal 1: Speziell gestaltete Unterbacke Backen für CK-3.75ZNS1 sind mit folgenden Spannfuttern kompatibel: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Rekordleistung SC3, Rekordleistung SC4 Funktion 2: Zwei Sätze Verriegelungslöcher für den Rückwärtsgang Das Design des Verriegelungslochs berücksichtigt die Hauptspindelgewindeführung verschiedener Marken von Holzdrehmaschinen auf dem...
- $165.95 USD
$185.95 USD- $165.95 USD
- Unit price
- / per
4 reviews
Sidebar
Kürzlich angesehene Produkte
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
- Choosing a selection results in a full page refresh.