CHUCKS & JAWS
-
CK-4.5"-PJ Pin Jaws for 4.5" Series Woodturning Lathe Chuck, Woodworking Lathe Tools.
These pin jaws have both a compression and expansion grip, typically used for gripping inside the bases of small bowls, egg cups and goblets, or the outside of small tenons. Jaws will also grip small tenons in compression mode, without marking the surface. Class...- $27.53 USD
$27.53 USD- $27.53 USD
- Unit price
- per
-
CK-4.5"-SJ Step Jaws for 4.5" Series Chuck for Woodturning Lathe, Wood Lathe chuck Jaws.
Designed for BMWOOD CK-4.5" series chucks. The step jaws give different grip types for multipurpose use.- $28.65 USD
$28.65 USD- $28.65 USD
- Unit price
- per
-
CK-4.5"-WJ Wide Jaws for 4.5" Series Chuck for Woodturning Lathe, Wood Lathe chuck Jaws.
Designed for BMWOOD CK-4.5" series chucks. The wide jaws expand with much greater gripping power with outside grip range from inches and inside grip range from inches.- $32.47 USD
$32.47 USD- $32.47 USD
- Unit price
- per
-
5.5" Wood Lathe Chuck - 1-1/4"x8TPI Thread with 5 Jaw Sets & Adapter (Includes T-Key/Washers) for 1"x8 Spindles
5.5" Woodlathe Chuck, Thread 1-1/4"x8TPI", Dovetail Jaws, Pin Jaws, 10" Flat Jaws, Step Jaws, Wide Jaws, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Two Chuck Keys and T Handle Key. 5.5" Chuck Set includes: 5.5" Chuck Body, Dovetail Jaws, Pin Jaws, 10"...- $317.95 USD
$317.95 USD- $317.95 USD
- Unit price
- per
-
5.5" 4 Jaw Key Self-Centering Woodlathe Chuck, Thread 1-1/4"x8TPI", with Dovetail Jaws, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Chuck Key and T Handle Key for Woodturning Lathe.
Includes: 5.5" Chuck body,Dovetail Jaw, Wood Screw, Thread adaptor to 1"x8TPI, Two Nylon Washers, Chuck Key and T Handle Allen Key. MAKE SURE check your wood lathe SPINDLE THREAD FIT first. Powerful and Positive Grip: The Self-Locking system delivers incredible gripping power after tightening,...- $215.99 USD
$215.99 USD- $215.99 USD
- Unit price
- per
-
CK-5.5"-FP Face Plate Ring for 5.5" Series Woodturning Lathe Chuck, Woodturning Tools.
Designed for use with dovetail jaws, this faceplate ring provides a secure attachment to bowl blanks, eliminating the need for separate faceplates. Securely attach bowl blanks, eliminating the need for separate faceplates. Excellent concentricity, minimising vibration for a chatter-free, super fine finish. Expand dovetail...- $13.81 USD
$13.81 USD- $13.81 USD
- Unit price
- per
-
CK-5.5"-FJ10 10" Flat Jaws with 8pcs Taper Plug Screws for 5.5" Series Woodlathe Chuck, Woodturning Tools.
These 10" button jaws are designed for re-mounting bowls, to remove marks created by the chuck or to add decoration. Commonly used in compression mode, gripping with the long or short screw-in synthetic polymer buttons. Used to re-shape the bottoms of bowls that have...- $40.70 USD
$40.70 USD- $40.70 USD
- Unit price
- per
-
CK-5.5"-WJ Wide Jaws for 5.5" Series Chuck for Woodturning Lathe, Wood Lathe chuck Jaws.
Designed for BMWOOD CK-5.5" series chucks. The wide jaws expand with much greater gripping power with outside grip range from inches and inside grip range from inches.- $35.44 USD
$35.44 USD- $35.44 USD
- Unit price
- per
-
CK-5.5"-PJ Pin Jaws for 5.5" Series Woodturning Lathe Chuck, Woodworking Lathe Tools.
These pin jaws have both a compression and expansion grip, typically used for gripping inside the bases of small bowls, egg cups and goblets, or the outside of small tenons. Jaws will also grip small tenons in compression mode, without marking the surface. Class...- $31.49 USD
$31.49 USD- $31.49 USD
- Unit price
- per
-
CK-5.5"-SJ Step Jaws for 5.5" Series Chuck for Woodturning Lathe, Wood Lathe Chuck Jaws.
Designed for BMWOOD CK-5.5" series chucks. The step jaws give different grip types for multipurpose use.- $28.74 USD
$28.74 USD- $28.74 USD
- Unit price
- per
-
Super Heavy Duty 5/8" Drill Chuck with MT2 Shank and Chuck Key for Woodlathe and Pillar drills
BMWOOD Super Heavy Duty 5/8" Drill Chuck with MT2 Shank and Chuck Key for Wood lathe and drill press Heavy Duty Drill Chuck includes the 5/8"(16mm) drill chuck, #2 Morse Taper Arbor and Jaw Tightening Key. The drill chuck can be installed on the...- $21.45 USD
$21.45 USD- $21.45 USD
- Unit price
- per
-
Super Heavy Duty 5/8" Keyless Drill Chuck with MT2 Shank for Woodlathe and Pillar drills
BMWOOD Super Heavy Duty 5/8" Drill Chuck with MT2 Shank and Chuck Key for Wood lathe and drill press Heavy Duty Drill Chuck includes the 5/8"(16mm) drill chuck, #2 Morse Taper Arbor and Jaw Tightening Key. The drill chuck can be installed on the...- $27.45 USD
$30.45 USD- $27.45 USD
- Unit price
- per
-
3 Pcs Set Draw Bar Collet Chuck 1/2", 3/8", 1/4", MT2 Taper, with Inner Thread 3/8 "x16TPI for Woodturning Wood Lathe.
Drawbar Collet Chuck are designed for use with Drawbar Collet Chuck system MT2. Inexpensive quality chucking system for turning small projects like spinning tops, birdhouse finials and similar items where accuracy and tool accessibility are a priority. Many professional pen turners prefer using a...- $49.95 USD
$49.95 USD- $49.95 USD
- Unit price
- per
-
1/2-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $36.99 USD
$36.99 USD- $36.99 USD
- Unit price
- per
-
5/8-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $39.99 USD
$39.99 USD- $39.99 USD
- Unit price
- per
-
1/2-Inch Keyless Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor with 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 1/2 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $39.99 USD
$39.99 USD- $39.99 USD
- Unit price
- per
-
5/8-Inch Keyless Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor with 1/4"x20TPI for Drill Press, Wood lathe or Mill.
Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...- $42.99 USD
$42.99 USD- $42.99 USD
- Unit price
- per
-
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 3/8"x16TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill chuck or other tools on the spindle of...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 1/4"x20TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 1/4"x20TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill bit on the spindle of the lathe can...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
2 inch 2 Jaw Pen Chuck, Drilling Wood Lathe Chuck with 1" X 8TPI Thread, Including 2 Nylon Washers for Woodturning Pen Turning Lathe
Applicable to pen-making square material clamping, auxiliary drilling. Coming with two nylon washers for keeping your lathe chuck or face plate from getting stuck. Designed with a special V- slot inside the jaw, more suitable for clamp square material. The jaws are attached to...- $56.99 USD
$56.99 USD- $56.99 USD
- Unit price
- per
